Vacuum Head

Rinse the filters safely, cut tangled hair off the brush roll, and clear hidden airway clogs without wetting the motor to bring back full vacuum suction.

Clear clogged airways, untangle hair from roller bars, and fix leaking bin gaskets to restore full stick vacuum suction without buying a new machine.

Clear tangled hair off the roller bar, wash the filters in cold water, and clean the bin safely without getting water inside the motor or steering ball.

Fix a stubborn ball vacuum that lost suction, resists steering, or will not stand upright. Clear hidden duct clogs and reset slipped latches with simple tools.

Clear tangled hair from the roller, wash the filters, and unclog hidden ball airways to restore full suction while keeping the motor safe from moisture.

If your vacuum shut off or lost suction, clear blocked hoses, free the bristle roller, and reset the safety switch to get it running again safely.

Restore suction on your ball vacuum without water damage. Wash the filter, clear tangled hair from the roller, and keep moisture out of the cyclone cones.

Release the clear dirt bin, unlock the outer ball wheel, and access hidden suction hoses to clear clogs without snapping brittle plastic clips or seals.

Snip wrapped hair off the roller brush, clear hidden debris inside the ball airway, and wash filters safely to restore lost suction and stop bad smells.

Push the red lever forward to empty the clear dirt cup, and use a coin to unlock the floor head roller without snapping the stiff plastic latches.

Wash only the clear plastic dust bin, keep water away from the inner cones, and air-dry for 24 hours to restore suction and clear stubborn pet odors safely.

Switch foreign voice alerts and screen text back to English. Update your robot vacuum in the mobile app or change the display menu on your stick vacuum.

Get your DC28 brush roller spinning again. Safely remove the bottom cover without snapping tabs, stretch the new belt onto the shaft, and clear stuck hair.

Unlock the side cap with a coin, cut away tangled pet hair, and keep water away from the motor so your floor nozzle roller spins freely without damage.

Cut away tangled hair and unclog the suction path to restore lost airflow. Remove the roller bar and clean washable parts without wetting the motor casing.

Fix a stalled brush roller and burning smell. Loop the new belt over the motor shaft, align the roller caps, and spin it by hand to verify smooth movement.

Clear tangled hair, unclog the airway, and wash parts safely without snapping plastic tabs or wetting the motor so your roller brush spins freely again.

Rinse both Ball Animal 2 filters under cold water without soap, then air-dry them for 24 hours to protect the motor and restore lost suction.

Swap a dead cordless vacuum battery without damaging the casing. Release click-in latches, undo handle screws safely, and match the exact replacement voltage.

Swap a dying stick vacuum battery instead of buying a new machine. Identify click-in versus screw-in packs, remove the old unit, and slide in the replacement.