Vacuum Head

Wash the top foam filter, cut tangled hair off the brush roller, and check for hose clogs to restore suction without risking water damage to the motor.

Rinse your V11 filter under cold water, clear tangled roller hair, and wipe the bin. Keep the motor dry and let parts air-dry fully to stop mildew smells.

Equip your housekeeping team with durable commercial vacuums built for fast room turnover, smooth carpet-to-tile transitions, and zero mid-shift breakdowns.

Wash the filter with cold water, clear tangled hair from the roller, and clean the bin without wetting the motor to stop pulsing and restore suction.

Restore full suction by confirming whether your split is in the stretch wand or internal duct hose, then replace the part without cracking the ball housing.

Struggling with a stalled brush roller? Swap out your Dyson DC33 two-belt clutch assembly step by step, manage belt tension safely, and restore spinning power.

Wash the filter, clear tangled hair, and clean the bin without damaging the motor. Follow safe drying steps to stop motor pulsing and restore strong suction.

Wash both filters in cold water, clear roller hair, and let parts air-dry fully to stop your V8 Animal from pulsing and safely restore strong suction.

Restore lost suction and clear musty odors safely. Wash the filters, unclog the roller head, and air-dry parts for 24 hours to protect your V8 motor.

Restore suction and stop motor pulsing safely. Wash both filters in cold water, clear the roller, and let parts dry for 24 hours before reassembly.

Fix a stalled brush roller on your Dyson DC14. Route the dual clutch belts correctly and stretch tight rubber over the pulley without cracking the housing.

Fix a frayed vacuum cord safely by matching the wire gauge, wiring switch terminals correctly, and securing the strain relief to prevent electrical shorts.

Rinse both V7 filters in cold water, clear wrapped hair from the roller, and remove airway clogs to stop motor pulsing without risking water damage.

Stop pulsing and restore suction on your V7 vacuum. Rinse the filters in cold water, clear tangled brush hair, and dry parts 24 hours to keep the motor safe.

A dead vacuum rarely means a ruined motor. Check the power source, clear airway clogs, and let the heat safety switch cool down to get it running again.

Fix pulsing and weak suction on your V6 Animal. Wash the filters in cold water, clear pet hair off the brush roller, and keep moisture away from the motor.

Handheld vacuums usually lose suction or cut out from choked filters, jammed brush bars, or dirty charging pins. Clear these simple blocks to restore power.

Wash your V6 filters, untangle the brush roller, and let parts dry fully to clear clogs, stop pulsing, and restore strong suction without damaging the motor.

Fix pulsing motors, weak suction, and stuck roller brushes before buying a new vacuum. Clear hidden wand clogs, free tangled hair, and wash dirty filters.

Clear hair from the roller, wipe out the dirt bin, and safely unclog airways. Protect your suction by knowing why water must never touch the cyclone cones.