The subtle latch molding on the bottom tray decides whether a replacement head assembly actually works or drops flat mid-stride. While these dual-action steam vacuum units share almost identical outer shells across standard and pet editions, their snap-in foot brackets, motor filter heights, and pad dimensions do not interchange cleanly. Grabbing the wrong series match leaves you with wet streaks and zero suction recovery, turning what should be a quick floor refresh into a messy puddle. A warped tray or an ill-fitting microfiber sleeve only drags dirty water across sealed tile, while a choked pleated filter strains the motor until suction cuts out completely.
Getting that effortless clean back on your hard floors comes down to pairing the machine series with the right hardware footprint. Confirming the molded tray clip design and verifying whether your housing takes the classic or pet-edition pleated filter prevents loose attachments and restores sharp airflow. Choosing dual-texture microfiber pads with integrated scrubbing strips also ensures sticky kitchen spills lift on contact instead of smearing. Below, the most reliable matching pads, base trays, and motor filters are lined up so your cleaning head glides, steams, and vacuums seamlessly again.
COMPATIBLE MODELS: Our 2747A mop pads are compatible with Bissell PowerFresh Vac & Steam Mop 2747A, Bissell Symphony All-In-One Vaccum and Steam Mop 1132 1543 1652 Series, 1132R 1132S 11321 11326 11328 1132A 1132M 1132Q 1132X 1530 2747A 1132P 1652 1132K 1543T 1543A, Model 1252, 1606670, 1606671.6 PA
Key specs
- Pad Selection
- The six-pack provides an equal split between smooth microfiber for general dusting and striped scrub pads engineered to loosen dried kitchen residue.
- Cross-Series Fit
- Symphony 1132 and 1543 series
- PowerFresh Vac and Steam 2747A
- Replaces OEM part numbers 1252 and 1606670
Pros:
- Includes three soft pads for daily wiping and three textured pads with scrubbing strips for sticky messes
- Compatible across Bissell Symphony 1132, 1543, and 1652 series as well as PowerFresh 2747A
- Machine washable microfiber construction allows repeated use without fabric softener
- Designed for all sealed hard floor surfaces including tile, laminate, marble, and wood
Cons:
- Listing does not state pad dimensions so fit relies entirely on matching your model number
- Must be air-dried rather than run through a heated dryer cycle to protect microfiber fibers
Designed to swap onto Symphony mop heads where worn tabs or cracked plastic prevent standard snap-on microfiber pads from staying anchored.
Key specs
- OEM Component
- Part Number 1602390
Pros:
- Direct OEM replacement base tray matching part number 1602390
- Lightweight tray profile at 0.25 pounds keeps machine maneuverable
- Restores secure foot latching to stop mop pads from dislodging during operation
Cons:
- Replacement tray only and does not include microfiber cleaning pads
- Listing lacks specific series breakdown beyond part number 1602390
PERFECT COMPATIBILITY: These microfiber steam mop pads replacement kit are compatible with Bissell Symphony All-In-One Vaccum and Steam Mop 1132 1543 1652 Series Bundle 1132K;Bissell Symphony Pet All-In-One Vacuum and Steam Mop 1543T 1543 1543A;Bissell Symphony All-In-One Vacuum and Steam Mop 1132R
Key specs
- Pad Selection
- Supplies five delicate-surface soft pads and five abrasive-strip scrub pads for homes needing frequent pad rotations between multiple rooms.
- OEM Equivalent Fit
- Bissell part number 1252
- Bissell part number 1606670
- Bissell part number 1606671
Pros:
- Generous ten-piece bundle includes five soft and five scrubbing microfiber pads
- Matches OEM specifications for Bissell part numbers 1252, 1606670, and 1606671
- Fits extensive model lineups across Symphony 1132, 1543, 1652, and 2747A units
- Separate soft and scrubby pads let you dedicate specific pads to kitchens or bathrooms
Cons:
- Requires air drying after machine washing without bleach or fabric softeners
- Total package weight is 1.08 pounds which adds minor bulk to supply closet storage
EVERY PURCHASE SAVES PETS. BISSELL proudly supports BISSELL Pet Foundation and its mission to help save homeless pets.NEW 2024 MODEL WITH ACTIVE EXTENSION WAND. Clean hard-to-reach areas quickly and easily.SWIVEL STEERING. Maximize maneuverability to clean around furniture and corners.TRIPLE ACTION
Key specs
- Brush Roll Type
- Triple Action Brush Roll
- Navigation and Reach
- Swivel steering guides the cleaning head closely around obstacles, while an integrated extension wand handles above-floor corners.
Pros:
- Full upright vacuum option featuring swivel steering for navigating around furniture legs
- Triple Action Brush Roll lifts embedded hair and dirt across various floor coverings
- Multi-cyclonic suction system maintains airflow while channeling debris into the dirt tank
- Includes extension wand to expand cleaning reach beyond low floor levels
Cons:
- Dedicated dry upright vacuum without any steam sanitation or mopping capabilities
- Listing does not provide overall unit weight or exact power cord length
POWERFUL SUCTION. Dirt, fur & dust don’t stand a chance against the Pet Hair Eraser Allergen Lift-Off vacuum’s suction power.LIFT-OFF DETACHABLE POD. Conveniently clean anywhere in your home, even hard-to-reach areas, with the lightweight canister and quick-release extension wand.HEPA SEALED ALLERGE
Key specs
- Filtration Type
- HEPA Media
- Agitator Design
- Engineered with a tangle-free brush roll mechanism to minimize hair wrap when lifting pet fur from area rugs and carpeted surfaces.
Pros:
- Lift-Off canister configuration separates from the base for above-floor and stair cleaning
- Integrated HEPA media filtration helps capture microscopic pet allergens and dust particles
- Tangle-Free brush roll prevents long pet hair from wrapping tightly around the agitator
- Delivers dedicated upright pet vacuuming power for thick carpets and rugs
Cons:
- Traditional dry vacuum that cannot replace Symphony steam and sanitizing functions
- Manufacturer does not state dust bin capacity or extension hose stretch length
POWERFUL SUCTION: Targets dirt, dust, and more for a thorough clean.XL DIRT CONTAINER: Holds up to 2 liters of debris.TURBOPASS BRUSH ROLL: TURBOPASS Brush Roll and a wide cleaning path help provide powerful pet hair pick-up with every pass.SCATTER FREE TECHNOLOGY: Clean hard floors with less effort
Key specs
- Dust Containment
- Large Dirt Container
- Pet Hair Handling
- Combines a pet hair brush roll with auxiliary handheld pet tools to clear shedding from carpets, stair treads, and fabric furniture.
Pros:
- Large-capacity dirt container reduces the frequency of emptying stops during big jobs
- Dedicated pet hair brush roll loosens embedded fur across floor surfaces
- Includes specialized pet hair attachment tools for cleaning upholstery and edges
Cons:
- Standard upright vacuum without steam sanitation or hard-floor wet mopping features
- Does not feature swivel steering for tight turning around low furniture bases
【TWO TYPES OF PADS】: 4 pack bissell symphony pads included, 2 soft microfiber mop pads for everyday cleaning, 2 soft microfiber mop pads with scrubbing strips for tough, stickier messes【COMPATIBILITY】Fit for Bissell symphony 1132, 11321, 11326, 11328, 1132A, 1132M, 1132Q, 1132R, 1132X, 1530, 1652, 1
Key specs
- Floor Compatibility
- Sealed hardwood and laminate
- Ceramic tile and marble
- Low-pile rugs and carpet gliders
- Kit Contents
- 2 Soft Pads and 2 Scrubby Pads
Pros:
- Includes two soft pads for delicate floors and two abrasive-stripe pads for dried grime
- Compatible with Symphony 1132 and 1543 series plus PowerFresh Vac and Steam 2747A
- Washable and reusable microfiber fabric resists linting and fraying across regular cycles
- Safe for use across tile, laminate, sealed hardwood, and marble flooring
Cons:
- Four-pack size offers fewer total spare pads than larger replacement bundles
- Requires air drying and washing without softeners to prevent residue buildup on fibers
4yourhome Vacuum Steam Motor Filter Kit Compatible With Bissell Symphony 1410 Hard Floor 1132 Vacuum Steam Mop CleanersVacuum Steam Motor Filter Kit Compatible With Bissell Symphony 1410 Hard Floor 1132 Vacuum Steam Mop CleanersKit Includes: 1 x pleated circular & 1 x washable foam filterCompatible
Key specs
- Filter Architecture
- 1 Pleated Circular and 1 Foam
- Series Fit Verification
- Sized strictly for Bissell 1132 and 1410 series vacuum housings, ensuring an airtight seal where 1543 series filters are too large.
Pros:
- Dual-filter kit includes both the inner pleated circular filter and outer foam sleeve
- Restores air suction path on Bissell Symphony 1410 and 1132 series machines
- Washable foam pre-filter can be rinsed clean between full filter replacements
- Matches aftermarket part number USAFIL633 for direct motor housing insertion
Cons:
- Exclusively engineered for 1132 series and will not fit 1543 Pet series housings
- Listing does not state filter micron rating or recommended replacement intervals
Every Purchase Saves Pets. BISSELL proudly supports BISSELL Pet Foundation and its mission to help save homeless pets.LIGHTWEIGHT (10 LBS). Powerful suction in a lightweight and compact vacuum makes cleaning functional and easily maneuverable.FULL SIZE POWER, COMPACT DESIGN. Powerful suction in a li
Key specs
- Form Factor
- Compact Upright
- Wand Operation
- Features a quick-release wand mechanism that pulls free from the main body for clearing baseboards, window sills, and ceiling corners.
Pros:
- Compact upright frame engineered for easy storage in apartments, dorms, and small spaces
- Quick-release extension wand allows rapid changeovers to above-floor cleaning
- Delivers full-size vacuum motor performance within a reduced footprint
- Easy-empty upright dust collection simplifies dry debris removal
Cons:
- Does not steam mop or clean wet hard-floor spills like Symphony units
- Listing does not state exact bin volume, cord length, or machine weight
Compatible with Bissell Symphony Pet All-in-One Vacuum and Steam Mop 1543A, 1543T, 1543, 15433, 15434, 15436, 15437, 15438×××！！！PLEASE NOTE: NOT fit for Bissell All In One Vacuum and Steam Mop 1132, 11321, 11326, 11328, 1132A, 1132M, 1132Q, 1132X, 1530, 2747A,1132K, 1132P, 1132R, 1132S, 1632, 1652Co
Key specs
- OEM Equivalent Fit
- Part Number 1606886
- Housing Compatibility
- Molded exclusively for the wider filter cage of the Symphony Pet 1543 series, preventing improper seating and suction loss.
Pros:
- Engineered specifically to match Bissell OEM filter part number 1606886
- Includes one pleated vacuum filter and one matching foam filter sleeve
- Compatible with Symphony Pet 1543 series models including 1543A, 1543T, and 15438
- Restores motor airflow and prevents fine pet dust from bypassing the collection cup
Cons:
- Explicitly incompatible with Symphony 1132, 1530, 1632, 1652, and 2747A models
- Foam sleeve must be completely air-dried before reinserting into the vacuum chamber
Compatible with Bissell Symphony All-In-One Vacuum and Steam MopVacuum Models 1632, 11321, 11326, 11328, 1132A, 1132M, 1132Q, 1132X, 1530, 2747A, 1132K, 1132P, 1132RPlease NOTE: NOT FIT FOR Bissell Symphony Pet Steam Mop and Steam Vacuum Cleaner 1543, 1652 Series VacuumCompare to part# 1603520What's
Key specs
- Maintenance Cycle
- Replace Every 3 Months
- Series Fit Verification
- Fits Symphony 1132, 1632, 1530 series
- Fits PowerFresh Vac and Steam 2747A
- Replaces Bissell part number 1603520
Pros:
- Direct OEM replacement design matching Bissell part number 1603520
- Complete set provides one pleated circular inner filter and one washable foam filter
- Compatible with 1132, 1632, 1530, and 2747A series vacuum and steam assemblies
- Manufacturer outlines a 3-month replacement interval to sustain motor suction power
Cons:
- Explicitly will not fit Bissell Symphony Pet 1543 or 1652 series machines
- Pleated inner paper filter cannot be saturated with water during regular cleaning
Includes pleated circular & foam replacement filters for the BISSELL SymphonyThese filters work with the following BISSELL Symphony models: 11322, 1132K, 1132, 11321, 11326, 11328, 1132A, 1132M, 1132Q, 1132R, 1132X, and 1530Not dishwasher safe
Key specs
- Filter Architecture
- Genuine Bissell Part 1250
- Maintenance Care
- Filters are not dishwasher safe. The foam pre-filter requires gentle hand washing and full air drying before reinstallation into the housing.
Pros:
- Genuine Bissell OEM factory replacement kit carrying part number 1250
- Includes original specification pleated circular and foam motor filters
- Compact package dimensions at 6.5 by 5 by 1.8 inches and a light 0.2-pound weight
- Engineered to fit Bissell Symphony 1132 series variations and model 1530
Cons:
- Components are not dishwasher safe and pleated element must not be washed roughly
- Does not fit Symphony Pet 1543 series vacuum chambers
- Manufacturer lists no formal warranty coverage
Last update on 2026-09-24 / Affiliate links / Images, Product Titles, and Product Highlights from Amazon Product Advertising API
Which replacement mop pads fit the Bissell Symphony vacuum head base?
Replacement pads designed for part numbers 1252 and 1606670 fit the foot assembly across the Symphony 1132, 1543, and 1652 series, as well as the PowerFresh Vac and Steam 2747A. Most multi-packs supply both soft microfiber pads for everyday debris pickup on delicate floors and textured pads with scrubbing strips to loosen sticky messes. Checking that your unit belongs to supported series such as 1132A, 11326, 1543A, or 1543T ensures the pad wraps securely around the baseplate without bunching up or slipping off during forward passes.
What causes the mop pad tray to drop off the vacuum head during cleaning?
A cracked retaining tab or warped frame on the mop pad tray prevents the base from latching onto the vacuum foot. The direct replacement is the Bissell Mop Pad Tray part number 1602390, which weighs 0.25 pounds and snaps directly beneath the suction nozzle. If your machine leaves uneven moisture or drops the cloth attachment mid-clean, inspect the plastic latch points on the existing tray for hairline fractures that break the physical lock.
Why does the 1543 Pet series filter fail to fit an 1132 series housing?
The motor housing dimensions and filter brackets differ between generations, making their internal filters non-interchangeable. The Symphony Pet 1543 series uses replacement filter assemblies aligned with part number 1606886, which fit models like 1543A, 1543T, 15436, and 15438, but will not mount inside an 1132, 1530, 1632, or 2747A housing. For an 1132 series machine, you must select filters designed to match part number 1603520 so the dirt cup seals properly and prevents suction leaks.
What replacement filters restore suction to the Bissell Symphony 1132 series?
Suction loss on 1132 models usually stems from clogged internal elements, which require installing the Bissell Symphony vacuum filter pack under model number 1250. This kit contains a pleated circular filter and a foam filter that fit models including 1132, 11321, 11326, 11328, 1132A, 1132K, 1132R, and 1530. The red assembly measures 6.5 inches high, 5 inches wide, and 1.8 inches long, dropping directly into the filter seat to restore proper airflow through the vacuum head.
When should you use scrubby pads instead of soft microfiber pads?
Soft microfiber pads work best for daily maintenance on sensitive sealed hard floors, while pads embedded with scrubbing strips handle stubborn, sticky residue on durable surfaces. Using the textured scrubbing pad provides the mechanical agitation needed to cut through dried spills while the steam softens the grime. For maintenance advice across different hard-floor attachments, explore options for streak-free floors to pair the right pad texture with your specific room layout.
Can the 4yourhome motor filter kit work with older Symphony models?
The 4yourhome blue vacuum steam motor filter kit, part number USAFIL633, is manufactured specifically for Bissell Symphony 1410 and 1132 hard floor series vacuum steam mop cleaners. Replacing this filter keeps fine dust particles from entering the motor fan area after steam and debris pass through the cleaning foot. Always check the model sticker on the back of your machine spine to confirm you have an 1132 or 1410 base before ordering.
