COMPATIBILITY: These filters replacement kit are compatible with Bissell for CleanView 2488, 2486, 2487, 2492, 2490, 2489, 24899, 2491, PowerClean 2494 Vacuum Cleaner. Compare to Part # 1604130, 1601972 and 1608225PACKAGE INCLUDED: The 2486 filter replacements for Bissell included 2 HEPA filters and
Key specs
- Filtration and HEPA
- Includes 2 HEPA filters for fine dust capture
- Includes 4 washable foam filters and 4 felt filters
- Replaces factory part numbers 1604130, 1601972, and 1608225
Pros:
- Supplies a generous 10-piece bundle with 2 HEPA, 4 foam, and 4 felt filters plus a brush
- Foam and felt elements can be rinsed under clean water and air-dried for reuse
- Matches Bissell part numbers 1604130, 1601972, and 1608225 without requiring tools
Cons:
- HEPA filters cannot be washed and must be replaced every 2 to 3 months
- Does not include replacement drive belts or roller parts for the floorhead
FITS MODELS: Aryavos filters replacement kit fit for Bissell CleanView 2486, 2487, 2488, 2489, 24899, 2490, 2491, 2492, PowerClean 2494 Vacuum, Compare to Part 1608225, 1604130, 1601972HIGHLY PERFORMANCE: Vacuum filters replacement for Bissell 2489 are made by high strength materials that can effici
Key specs
- Filtration and HEPA
- The multi-stage setup pairs pleated HEPA media rated down to 0.3 microns with washable foam to stop fine dust before it reaches the vacuum motor.
Pros:
- Rated by the manufacturer to capture particles down to 0.3 microns
- Foam filter cleans easily with warm soapy water to sustain airflow
- Direct fit for Bissell part numbers 1608225, 1604130, and 1601972
Cons:
- Smaller pack than competing kits with only two foam and felt pairs included
- Foam filters must dry completely before reinstalling to prevent motor damage
1. Compatible with CleanView rotary vertical vacuum cleaner 2252 2486 2489 24899 27909 2254 2254 2255 2256 2258 2316 1214 series, etc2. High-quality materials, activated carbon cotton secondary filtration can filter dust3. It can be washed and reused. It is recommended to replace the filter every 3-
Key specs
- Maintenance routine
- Rinse each filter in tap water when suction drops and allow it to dry fully. The manufacturer advises replacing the insert every 3 to 6 months.
Pros:
- Activated carbon cotton layer helps capture secondary dust emissions
- Simple slide-in installation requires zero hand tools
- Washable design allows extended use across a 3 to 6 month service interval
Cons:
- Does not include exhaust HEPA filters or pre-motor felt pads
- Requires confirmation of the 5.3-inch diameter against your specific CleanView model
Complete Brush Roll & 2 Belts Replacement Kit (#3031120) Restore strong cleaning performance with this complete replacement kit. Includes a high-quality brush roll and a multipurpose cleaning brush—designed to bring your vacuum back to peak efficiency.Broad Compatibility – CleanView & PowerLifter Co
Key specs
- Brush roll type
- The roller uses high-density stiff bristles set into reinforced ABS housing, designed to loosen pet hair and embedded grit from carpet fibers.
Pros:
- Includes two drive belts alongside the roller to provide an immediate spare
- High-density bristles and reinforced ABS body agitate carpet piles effectively
- Replaces original Bissell part numbers 1611230, 1604545, and 1600159
Cons:
- Installing the belt around the motor shaft requires removing the floorhead soleplate
- Does not include replacement mounting screws if the original housing screws strip
Compatible models:This for Bissell vacuum filter replacement designed to Compatile with Bissell CleanView & Compatile with Powerlifter Swivel Pet Vacuum Cleaner 2255, 2739,2258,2256,2254, 22543, 22548,22547,22549, 22582,2316,2252,2488,2486, 2487, 2492,2490,2489, 24899, 2491,3197A, 3195, 3197,3198A,3
Key specs
- Warranty and support
- 1-year manufacturer warranty
Pros:
- Provides three washable replacement foam filters matching part numbers 12141 and 1601972
- Backed by an official 1-year manufacturer warranty
- Includes a compact cleaning brush to clear fine dust from the filter ribs
Cons:
- Foam-only kit lacks the pleated post-motor HEPA cartridge
- Filter must dry completely after washing before running the vacuum
Complete Brush Roll & Belt Replacement Kit (#3031120) Restore strong cleaning performance with this complete replacement kit. Includes a high-quality brush roll and a multipurpose cleaning brush—designed to bring your vacuum back to peak efficiency.Broad Compatibility – CleanView & PowerLifter Compa
Key specs
- Brush roll type
- Reinforced ABS with high-density bristles
Pros:
- Complete replacement set includes both the revolving brush bar and a matching drive belt
- High-density bristle construction lifts embedded debris from carpets
- Fits CleanView 2486 as well as broader 2252, 2254, and 3195 series uprights
Cons:
- Includes only a single belt compared to dual-belt alternative bundles
- Requires manual plate removal to loop the belt over the motor shaft
OnePass Technology with powerful suction and innovative brush design to clean on the first passScatter Free Technology reduces scatter on hard floorsOn board storage keeps specialized tools including the TurboBrush Tool, Dusting Brush, Crevice Tool, and Extension Wand close by while cleaningPowerful
Key specs
- Floor types supported
- Designed for carpets and hard surfaces alike, using OnePass brush agitation on pile and Scatter Free engineering to limit debris spray on bare floors.
- Attachments included
- TurboBrush Tool for upholstery and stairs
- Dusting Brush for delicate surfaces
- Crevice Tool for narrow edges
- Extension Wand for elevated reach
Pros:
- Multi-cyclonic system maintains continuous suction during extended cleaning runs
- Scatter Free Technology controls debris kickback when crossing bare floors
- Large capacity dirt container empties cleanly from the bottom with one button push
- Stores specialized attachments including the TurboBrush and crevice tool on board
Cons:
- Weighs 12.5 pounds which may feel heavy during multi-story vacuuming
- Uses a fixed straight-neck design rather than an articulating swivel joint
EVERY PURCHASE SAVES PETS. BISSELL proudly supports BISSELL Pet Foundation and its mission to help save homeless pets.SWIVEL STEERING FOR MAXIMUM MANEUVERABILITY. Makes cleaning around furniture and other obstacles easy. Filter replacement every 6 monthsTRIPLE ACTION BRUSH ROLL. Loosens, lifts and r
Key specs
- Swivel steering
- Integrated swivel neck steering
- Attachments included
- Specialized pet hair cleaning tools
Pros:
- Swivel steering mechanism maneuvers smoothly around table legs and furniture corners
- Large capacity dirt tank reduces stops during whole-home cleaning
- Includes specialized pet tools to capture stubborn fur from upholstery
Cons:
- Corded design limits radius to accessible wall outlets
- Detailed floorhead width and cord length are not stated and require verification
POWERFUL SUCTION: Targets dirt, dust, and more for a thorough clean.XL DIRT CONTAINER: Holds up to 2 liters of debris.TURBOPASS BRUSH ROLL: TURBOPASS Brush Roll and a wide cleaning path help provide powerful pet hair pick-up with every pass.SCATTER FREE TECHNOLOGY: Clean hard floors with less effort
Key specs
- Pet hair handling
- Configured with a dedicated pet hair brush roll and matching hand tools to separate clinging pet hair from carpets, rugs, and seating.
- Dust cup or bin capacity
- Large capacity bagless dirt container
Pros:
- Dedicated pet hair brush roll loosens embedded fur across various floor coverings
- Large dirt container holds substantial volume before requiring an empty
- Includes specialized pet hair tools for cleaning above-floor fabric surfaces
Cons:
- Specific vacuum weight and dimensions are omitted from manufacturer data
- Swivel steering capability is unconfirmed and should be checked before purchase
Broad Compatibility - These Belts are compatible with Bissell Cleanview Bagless Vacuum Cleaner Models 1319,1319A,1320,13202,1320A,1322,1328,1328V,1329,1330,13302,1330R,1331,1332,1332R,1333,1334,1327,1819,1820,1813,1822,1823,1824,1825,18252,1825R,1830,1831,1831K,1831R,1834,1836,1837,1838,2410,24101,2
Key specs
- Maintenance routine
- Replace every 3 to 9 months
- Replacement parts availability
- Supplied as a 2-pack of elastic rubber drive belts that restore brush roll spinning on CleanView 2486 and related upright platforms.
Pros:
- Flexible rubber construction provides reliable tension for proper roller rotation
- Dual pack ensures an instant spare belt remains on hand when snapping occurs
- Fits Bissell 2486 along with extensive CleanView 1831, 2489, and 9595A model lines
Cons:
- Rubber material stretches over time and requires renewal every 3 to 9 months
- Does not include roller brushes or motor intake filters
Every Purchase Saves Pets. BISSELL proudly supports BISSELL Pet Foundation and its mission to help save homeless pets.LIGHTWEIGHT (10 LBS). Powerful suction in a lightweight and compact vacuum makes cleaning functional and easily maneuverable.FULL SIZE POWER, COMPACT DESIGN. Powerful suction in a li
Key specs
- Weight and handling
- Scaled down for small spaces and tight corners, pairing a reduced footprint with a quick-release wand for stairs and corners.
Pros:
- Compact upright frame is tailored for tighter floorplans, apartments, and dorms
- Quick release wand detaches instantly for swift above-floor dusting and corners
- Turbo upright engineering maintains full-size suction in a reduced footprint
Cons:
- Smaller body likely holds less dust volume than full-sized CleanView canisters
- Specific cord length and exact unit weight must be confirmed on the product page
1. The product is suitable for Bisser vacuum cleaner brush roller belt 2252 2489 22543 24899 3195 3196 3197 3197A 3198 3198A 1327 1333 1820, 2383, 1825, 1813, 1823, 18252, 1825R, 1836, 1838, 2256, 2254, 22543, 22548, 2255, 2739, 2256K, 2258, 22582, 2259, 1830, 2260, 2253, 22547, 22549, 2316, 2252, 2
Key specs
- Head width and shape
- 12.9 x 2.24 x 2.24 inches roller
- Replacement parts availability
- Matches factory part numbers 1604545 and 1611230, providing a fresh roller and drive belt to restore carpet agitation.
Pros:
- All-in-one maintenance kit provides a 12.9-inch brush roll, belt, and cleaning brush
- Wear-resistant bristles pull embedded carpet dust and grit into the air channel
- Direct replacement for OEM part numbers 1604545, 1611230, and 1600159
Cons:
- Includes only one drive belt rather than multiple spares
- Soleplate screws must be loosened to fit the new belt and roller into the head
Last update on 2026-05-07 / Affiliate links / Images, Product Titles, and Product Highlights from Amazon Product Advertising API
The BISSELL CleanView 2486 is an upright bagless vacuum engineered for dry floor care, suitable for users seeking a wide 13.5-inch cleaning path, multi-cyclonic dust separation, and dedicated above-floor tools without the added cost of swivel steering. Featuring an orange 12.5-pound chassis measuring 44.5 by 13 by 14 inches, this corded vacuum utilizes OnePass brush technology and Scatter Free engineering to collect dry debris into an easy-empty 1-liter dirt container.
Our analysis derives strictly from supplied manufacturer specifications and verified replacement parts records; it does not represent independent or firsthand laboratory testing. In this evaluation, all technical measurements, part numbers, and compatibility listings are verified facts from source documentation, whereas buyer suitability assessments and maintenance intervals represent our editorial inference. Materially missing from manufacturer records are standardized airflow metrics (CFM), water-lift suction data, and noise decibel ratings; this absence of standardized comparative evidence constrains direct performance comparisons and limits our evaluation to verified physical specifications and component compatibility.
Floorhead Mechanics, Suction, and Reach
The floorhead on the BISSELL 2486 pairs OnePass brush agitation with Scatter Free technology to lift debris from carpets while minimizing particle scattering on bare floors. Cleaning reach is supported by a 25-foot power cord and a 6-foot stretch hose, with onboard storage for a TurboBrush tool, dusting brush, crevice tool, and extension wand. Its multi-cyclonic suction system separates fine dust from coarse debris inside the 1-liter bin to help maintain airflow as the container fills.
Maintenance Ecosystem: Belts, Brushes, and Filters
Sustaining agitation and airflow requires regular servicing of floorhead parts and filtration stages. The brush roll relies on an elastic rubber drive belt; replacement kits such as the LAOYE and Sionlan brush rolls (matching parts 1604545, 1600159, and 1611230) use reinforced ABS and high-density bristles. Belts such as the JEDELEOS J0048 or LAOYE 3031120 restore rotation, with manufacturers recommending replacement every 3 to 9 months to prevent belt slippage.
Intake and exhaust filtration relies on multi-stage media. Replacement sets from Anewise, Aryavos, VOULLY, and QINAN correspond to OEM parts 1608225, 1604130, 1601972, and 12141. These include washable foam and felt filters along with HEPA filters rated to capture particles down to 0.3 microns. Manufacturers advise washing foam elements in clean water and replacing filter media every 2 to 6 months to preserve motor life.
Model Comparisons: CleanView 2486 vs. 2252 and 4438
Key physical differences distinguish the 2486 from related CleanView models:
- CleanView 2486: Features an orange chassis, 13.5-inch path, 1-liter bin, 12.5-pound weight, and standard OnePass brush roll.
- CleanView Swivel Pet 2252: Shares the 12.5-pound weight and 44.5-inch height but adds swivel steering, a Triple Action Brush Roll, and edge-to-edge cleaning channels.
- CleanView 4438: Weighs 12 pounds with a larger 2-liter XL dirt container and TURBOPASS roller, measuring 44 by 8.9 by 13.66 inches.
Practical Buying Guidance
When choosing between these models, select the 2486 if your priority is fixed-path cleaning and broad coverage at a standard 12.5-pound weight. If navigation around table legs and tight furniture is critical, model 2252 provides documented swivel steering. Before ordering replacement belts, brush rolls, or filters, verify the exact part numbers on your existing unit—such as 1608225 or 1604545—to ensure proper fit.
