Many owners assume that any upright roller and belt will fit as long as the housing shares the same series name. In reality, overlapping model lines mean an off-size roller can quickly cause a jammed floor head, snapping brand-new belts and filling the room with the sharp smell of burning rubber. When roller end caps sit slightly off-kilter or the bristle core misses by a fraction of an inch, the brush stops spinning entirely. Instead of lifting stubborn pet hair and pulling deep grit from carpet pile, the vacuum merely skates across the surface, scattering crumbs and leaving dirty tracks behind.
Restoring that satisfying deep carpet agitation does not require buying a whole new machine. A few quick checks will get the brush spinning freely again: match the four- or five-digit number on the base rating sticker directly to the part specs, pick up a paired belt bundle, and confirm the end-cap notches before tightening down the bottom plate. Once those pieces align, suction and bristle sweep work together like new. Below, see the reliable replacement rollers and tune-up kits ready to revive your vacuum head in 2026.
Complete Brush Roll Replacement Kit Restore strong cleaning performance with this complete replacement kit. Includes a high-quality brush roll and a multipurpose cleaning brush—designed to bring your vacuum back to peak efficiency.Broad Compatibility – CleanView & PowerLifter Compatible with Bissell
Key specs
- Roller construction
- Built with reinforced ABS plastic and high-density bristles to sustain carpet agitation and resist regular wear across upright floor heads.
- Included maintenance tool
- Multipurpose cleaning brush included
Pros:
- Matches part numbers 1604545, 1600159, and 1611230 across CleanView and PowerLifter models
- Reinforced ABS body and high-density bristles improve agitation on carpet fibers
- Includes a multipurpose cleaning brush to help clear hair and debris during installation
- Installs without tools once the bottom access plate is removed
Cons:
- Does not include replacement drive belts in the package
- Requires verifying exact 4-digit or 5-digit base plate model numbers before ordering
Complete Brush Roll & 2 Belts Replacement Kit (#3031120) Restore strong cleaning performance with this complete replacement kit. Includes a high-quality brush roll and a multipurpose cleaning brush—designed to bring your vacuum back to peak efficiency.Broad Compatibility – CleanView & PowerLifter Co
Key specs
- Complete drive bundle
- Supplies both the replacement agitator roller and two 3031120 flat drive belts, letting you fix slipping belts and worn bristles in a single repair session.
- Belt part reference
- Replaces drive belt 3031120
Pros:
- Combines a replacement brush roller with two style 3031120 drive belts in one kit
- Restores head agitation and drive tension simultaneously on CleanView Swivel models
- High-density bristles lift pet hair from carpet pile when properly seated
- Includes a multipurpose cleaning brush for servicing end caps and bearings
Cons:
- Supplies two belts but only a single roller, leaving spare belts for future servicing
- Belt routing requires manual tensioning over the motor shaft during base assembly
Compatible Models: Replacement filter compatible with Bissell Adapt Ion and PowerLifter Ion 2-In-1 Cordless Stick Vacs Models 3061, 3079, 2286, 3191, 2482, 2387, 2286A, 22862, 3190, 3190A, 31902, 31927, 31921, 3192, 23873, 23874. Compared to parts 1616322, 1616323, 1616324, and 1617684. Any use of t
Key specs
- Filter pack size
- 4 reusable filters
- Cordless series fit
- Bissell Featherweight Cordless XRT (3061, 3079)
- PowerLifter Ion Pet series (3190, 3191)
- Adapt Ion Pet 2-in-1 and ReadyClean Cordless (2286)
Pros:
- Provides four washable and reusable replacement filters in a single pack
- Fits multiple compact stick vacuums including Featherweight Cordless and Adapt Ion
- Lets you rotate filters while washed units dry fully between cleaning cycles
Cons:
- Does not service upright CleanView or full-sized PowerLifter carpet heads
- Not compatible with corded Bissell upright models
Replacement charger compatible with Bissell 3061 featherweight cordless stick vacuum; Bissell cordless stick vacuum 3190; Bissell ReadyClean Cordless 10.8V lithium-ion battery Stick Vacuum 3190A; Bissell readyclean cordless 10.8v lithium-ion battery vacuum charger 31902; Bissell powerlifter ion pet
Key specs
- Charger compatibility
- Matches 10.8V lithium-ion battery packs on Bissell Featherweight Cordless 3061, Powerlifter Ion Pet 3191, and ReadyClean Cordless models.
- Supported battery type
- 10.8V Lithium-ion
Pros:
- Provides dedicated charging for 10.8V lithium-ion stick vacuum batteries
- Matches multiple cordless Bissell lines including 3061, 3190, and 3191 series
- Serves as a direct replacement adapter when original charging plugs are lost
Cons:
- Limited to specific 10.8V cordless units and will not charge 14V models
- Does not supply mechanical components for floor head roller repairs
[Compatible] Charger Only Compatible with Bissell 2286A 2389 2389C 2286 22862 2482 2286A Adapt Ion Pet 10.8V Lithium Ion 2 in 1 Cordless Stick Vacuum. Replacement Part Number: 1616326, 1627037[Specification] Input: AC 100-240 V 50/60 Hz; Line length: 1.8 M/6 FT[Note] NOT compatible other models, NOT
Key specs
- Supported adapter models
- Bissell 2286, 2286A, 22862 series
- Bissell 2389, 2389C series
- Bissell 2482 Adapt Ion Pet series
- OEM part matching
- Replaces parts 1616326 and 1627037
Pros:
- Matches OEM adapter part numbers 1616326 and 1627037 for precise power delivery
- Powers 10.8V lithium-ion packs on Adapt Ion Pet and Powerlifter Ion stick vacuums
- Compact wall-plug format restores battery charging without bulky cradles
Cons:
- Does not fit 14V cordless stick variants such as the 3191C series
- Restricted to handheld and stick models rather than upright carpet vacuums
【Widely Compatibility】This vacuum filter replacement is compatible with Bissell Powerforce Helix Vacuum 2191, 2190,1700,1797. Also compatible with Eureka Airspeed AS2000-AS2030 series upright vacuums including AS2000A, AS2013A Airspeed One, AirSpeed ONE Pet AS2030A, AirSpeed ONE Reach AS2020A, AirSp
Key specs
- Filter media and size
- Constructed from washable foam with HEPA media measuring 5.12 inches in diameter and 0.9 inches thick, matching part number 1608225.
- Multi-brand fit
- Bissell Powerlifter and CleanView Swivel (2252, 2254, 2191)
- Eureka Airspeed AS2000 through AS2030 series
- Eureka DCF-26 Allergen vacuums
Pros:
- HEPA media captures 99.97% of dust and debris particles down to 0.3 micron
- Washable foam construction allows rinsing and reuse across multiple maintenance cycles
- Fits numerous Powerlifter and CleanView Swivel models as well as Eureka Airspeed units
- Includes two filters measuring 5.12 inches in diameter and 0.9 inches in height
Cons:
- Must dry completely after washing before reinserting into the vacuum body
- Does not restore physical carpet agitation if the brush roll or belt is worn
Compatibility: Designed to be compatible with Bissell Powerlifter/ CleanView Swivel Rewind Pet Vacuum models 2252, 2253, 2254, 22543, 2255, 2256, 2258, 2259, 2260, 2316, 1790, 1792, 1792P, 1793, 1413, 1307, 1309, 2739 , Series. Replace Part No.32074Easy to Install: Lift off the brush plate and remov
Key specs
- Drive belt quantity
- 5 replacement belts
- Replacement interval
- Manufacturer guidelines suggest installing a fresh drive belt every 6 to 12 months to prevent roller slippage and maintain carpet agitation.
Pros:
- Supplies five rubber replacement belts to keep backup drive spares on hand
- Replaces worn part numbers 3031120 and 32074 on CleanView Swivel uprights
- Restores roller rotation when old belts stretch, slip, or snap under load
- Lightweight 0.08 lb package covers routine 6 to 12 month belt maintenance
Cons:
- Does not include a replacement roller or end-cap brush hardware
- Requires checking the specific series number against the 3031120 fit listing
Replacement Charger for Bissell POWERLIFTER ION PET 2-In-1 Lightweight Cordless 3191 3191C Vacuum Lithium-ion Battery 14v 800mA 2-in-1 Cordless Stick Vacuum E-Tek ZD12D140080USCompatible with: Bissell POWERLIFTER ION PET 2-In-1 Lightweight Cordless 3191 3191C Vacuum Lithium-ion Battery 14v 800mA 2-i
Key specs
- Power output ratings
- 14V 800mA
- Dedicated model scope
- Designed exclusively for the 14V lithium-ion battery system on Bissell Powerlifter ION PET 2-in-1 models 3191 and 3191C.
Pros:
- Delivers 14V at 800mA for Bissell Powerlifter Ion Pet cordless units
- Direct replacement for model E-Tek ZD12D140080US power supplies
- Dedicated charging plug for 3191 and 3191C lithium-ion stick vacuums
Cons:
- Higher 14V output makes it incompatible with 10.8V Bissell cordless stick models
- Provides no repair components for mechanical brush roller or drive belt issues
Every Purchase Saves Pets. BISSELL proudly supports BISSELL Pet Foundation and its mission to help save homeless pets..Runtime: 20.0 minutesCordless, Lightweight Vacuum. 10.8V lithium-ion battery provides up to 20 minutes of run time and charges in just 4.5 hours.Two-Way Folding Handle. Breaks down
Key specs
- Vacuum design
- Cordless stick vacuum
- Color scheme
- Electric Blue and Black
Pros:
- Cordless stick vacuum design provides lightweight maneuverability across rooms
- Operates without a power cord for quick spot cleaning and daily debris pickup
- Compact footprint simplifies storage in small utility closets and apartments
Cons:
- Battery-powered stick configuration does not provide the wide path of uprights
- Smaller dust container requires frequent emptying compared to full-size upright bins
- Not a replacement repair part for existing CleanView or PowerLifter upright floor heads
Complete Brush Roller Replacement Kit - The complete replacement kit helps you to make a whole parts replacement for Bissell vacuum cleaner, making your vacuum cleaner work as efficiently as it did in the first place.Broad Compatibility - The Brush Roll Belt is compatible with Bissell Powerlifter /
Key specs
- Three-piece service kit
- 1 Triple Action replacement brush roll
- 1 flat rubber drive belt
- 1 multipurpose cleaning tool
- Roller design
- Triple Action bristle layout
Pros:
- Includes a Triple Action brush roller, flat drive belt, and cleaning brush in one kit
- Replaces OEM roller part numbers 1604545, 1611230, and 1600159
- Compatible with broad series ranges including 2252, 2489, 1819, and 2254 uprights
- Wear-resistant plastic core maintains bristle stability against carpet pile
Cons:
- Package provides only one belt, so no spare remains after the repair
- Requires disassembling base plate screws with standard household hand tools
Last update on 2026-09-22 / Affiliate links / Images, Product Titles, and Product Highlights from Amazon Product Advertising API
Will a replacement brush roll fit Bissell CleanView and PowerLifter models 2252 and 2489?
Yes. Replacement roller kits matching part numbers 1604545, 1600159, and 1611230 fit both model 2252 and model 2489. These roller assemblies also match upright units across the CleanView, Swivel Rewind, Pet, and PowerLifter lines, including models 2253, 2254, 2256, 2258, 2259, 2260, 2316, 2486, 2487, 2488, 3195, 3196, 3197, 3197A, 3198, and 3198A. Always check the model number on your machine base plate to confirm compatibility before purchasing.
Should the drive belt be replaced when installing a new brush roller?
Yes, replacing the belt when installing a fresh roller maintains proper rotation and prevents immediate slippage. Bundles pairing roller part 1604545 or 1611230 with belt part 3031120 provide both parts together so the roller agitates carpet pile under full tension. A stretched belt fails to spin the roller at full speed, which leaves pet hair behind. For deep cleaning beyond dry vacuuming, pairing routine head maintenance with carpet extraction cleaners helps remove embedded dirt from heavy traffic spots.
How do I match the model number on my vacuum to part numbers 1604545 and 3031120?
Locate the rating sticker on the underside or back of your vacuum base to read your exact model code. Upright models such as 2252, 2254, 2258, 2260, 2316, and 2489 use brush roller part numbers 1604545, 1600159, or 1611230 alongside belt part 3031120. If your rating label shows a number outside these supported series, verify the specific part code in your vacuum manual before buying replacement floor components.
What is the correct way to install belt part 3031120 on the vacuum head?
Lift off the bottom brush plate, then take out the worn roller and the old belt. Loop the new 3031120 belt around the motor shaft, stretch it over the roller channel, and guide the roller ends back into their housing slots. Rotate the roller by hand to ensure smooth alignment before screwing the bottom plate back into place.
Can the circular filters on CleanView and PowerLifter vacuums be washed and reused?
Yes, replacement filters listed under part numbers 1608225 and 1640811 are washable for multiple uses. These round filters measure 5.12 inches in length and width with a height of 0.9 inches, fitting upright models including 2191, 2190, 1700, 1797, 2492, 2252, 2253, 2254, 22543, 2259, 2255, 2256, 2258, 2260, and 1792. Make sure the filter is completely dry before reinstalling it to protect the motor. For large homes dealing with heavy mud, dedicated equipment like commercial carpet extractors tackles wet wash jobs that upright dry vacuums cannot handle.
Which models use PowerLifter Ion Pet stick vacuum filters and chargers?
Bissell PowerLifter Ion Pet and Adapt Ion Pet cordless 2-in-1 vacuums use specialized stick filters and chargers separate from full-size upright parts. Reusable stick filter packs fit models 3061, 3079, 2286, 3190, and 3191. Charging adapters fit 10.8V lithium-ion units such as 2286, 2286A, 2389, 2389C, 22862, 2482, 3061, 3190, 3190A, 31902, 3191, and 3191C, while dedicated 14V 800mA chargers are listed for stick models 3191 and 3191C.
