A replacement basket often looks like a universal match on a computer screen, but a mismatch of just a fraction of an inch leaves a gap where debris slips straight through. Once pine needles and oak leaves sneak past the rim, they pack directly into the impeller veins, starving the pump of water and pushing the motor toward an overheated burnout. Thin, brittle plastic makes the issue worse by cracking under heavy suction or floating out of place whenever the pump timer shuts off, turning a five-minute skim into an afternoon spent taking apart wet plumbing.
The right replacement drops in flush, stays firmly seated under heavy flow, and lifts out cleanly without a flimsy handle snapping mid-cleanout. Getting that dependable seal requires verifying whether the basket sits in a through-wall skimmer or the pump strainer pot, then matching the outer rim diameter, bottom taper, and total depth to eliminate bypass gaps. Thick, chemical-resistant resin ensures the structure holds its shape through brutal summer sun and high chlorine levels. The options below highlight the best pool filter basket designs for standard equipment, keeping water moving and pumps completely clog-free.
Application: The filter basket is ideal for Pentair, WhisperFlo, Intelliflo VF, VSF, Variable Speed & VS+SVRS pool pumps.Replace Part Numbers: Pentair 070387, 070387Z; Aqua-Flo 91110040; Aladdin B-199, B199; Purex P01325; CMP 27180-199-000; 310-3210. Note: Please check the original part number and m
Key specs
- Pump housing compatibility
- Pentair WhisperFlo and IntelliFlo VF or VSF pumps
- Replaces Aladdin B-199 and Purex P01325 baskets
- Cross-referenced to Aqua-Flo 91110040 and CMP 27180-199-000
- Basket physical dimensions
- 7-4/5 in height with 5-2/3 in top diameter
Pros:
- Directly replaces Pentair 070387 and Aladdin B-199 baskets in WhisperFlo and IntelliFlo pumps
- Measures 7-4/5 inches tall with a 5-2/3 inch top opening to seat inside pump pots
- Heavy duty plastic construction washes out easily with a garden hose
- Sized specifically to capture fine debris before water enters the pump impeller
Cons:
- Fits pump strainer pots only and cannot be used inside pool wall skimmers
- Requires manual verification of pump model numbers because older housings vary in depth
Large debris collection basketHeavy duty UV resident ABS constructionTop and front basket accessSnap-in and removable weirCompatible with wide top seat pools
Key specs
- Assembly design
- This complete skimmer kit includes an integrated debris basket and weir door constructed from UV-resistant ABS plastic, built for wide top seat above-ground pools.
- Skimmer access options
- Top and front basket access ports
Pros:
- Complete above-ground skimmer assembly that includes a dedicated debris basket
- UV-resistant ABS construction protects the outer housing and weir from sun breakdown
- Features both top and front access ports for clearing out trapped yard waste
- Snap-in removable weir door helps keep collected leaves inside the basket
Cons:
- Full skimmer kit rather than a standalone drop-in replacement basket for existing skimmers
- Designed strictly for above-ground setups and wide top seat pool designs
Custom Molded Product Replacement Basket 27180-009-000 for Hayward Pool SkimmerThis basket is a direct replacement for the following: B-9 skimmer basket may be used to replace the following baskets: SPX1070E Hayward Skim Master, 516112 Pentair Bermuda and 08650-0007 Sta-Rite U3 baskets. B-9 skimmer
Key specs
- Swing handle design
- The integrated handle lifts and swings completely to the side during emptying, preventing sticks and pine needles from catching across the center span.
- OEM cross-reference
- Replaces Hayward SPX1070E Skim Master baskets
- Fits Pentair Bermuda 516112 skimmer wells
- Direct match for Sta-Rite U-3 part 08650-0007
Pros:
- Swing handle pivots completely to the side so leaves do not wrap around a center bar
- Replaces Hayward SPX1070E Skim Master, Pentair Bermuda, and Sta-Rite U-3 baskets
- Wide 8-1/4 inch top rim seats securely across standard skimmer wells
Cons:
- Shallow 5-1/16 inch depth limits volume during heavy autumn leaf drops
- Single pack option provides no immediate spare during peak seasonal cleanouts
Replacement Skimmer Basket for Hayward SP1082CA or SPX1082CABasket Dimensions 7ins Top Width - 6 1/2ins Bottom Width - 5ins Basket HeightFor Hayward S1082 Skimmers, Aladdin B-152 and Vac-Mate 211112
Key specs
- OEM cross-reference
- Replaces Hayward SP1082CA and SPX1082CA
- Compatible with Aladdin B-152 skimmer baskets
- Fits Vac-Mate 211112 skimmer housings
- Housing clearance measurements
- Molded with a 7-inch top width, 6-1/2-inch base, and 5-inch depth to seat flat inside Hayward S1082 skimmer bodies.
Pros:
- Direct match for Hayward SP1082CA, Aladdin B-152, and Vac-Mate 211112 skimmers
- Solid 1-pound molded construction resists flexing under continuous pump suction
- Sized with a 7-inch top width and 6-1/2-inch bottom width for stable seating
Cons:
- Lacks a pivoting handle for clearing stuck leaves out of the interior mesh
- Skimmer-only shape will not seat inside pump strainer pots
CLEAN AND CLEAR: Measuring roughly 6 inches by 4 inches, FibroPool skimmer baskets are a perfect replacement for above ground poolsALWAYS PREPARED: 2 pack gives you a spare basket to make it through the seasonCOMPATIBILITY: Fits common above ground pool skimmers; not compatible with in ground poolsO
Key specs
- Above-ground pool sizing
- Sized at approximately 6 inches by 4 inches for common above-ground skimmer housings. Not compatible with inground pool wells.
- Pivoting handle action
- Swings clear to avoid trapping yard debris
Pros:
- Includes two replacement baskets so you always have a clean spare on hand
- Pivoting handle swings clear during dumping so twigs do not tangle inside
- Compact 6-inch by 4-inch profile fits common above-ground pool skimmer wells
Cons:
- Explicitly incompatible with inground pool skimmer wells
- Approximate 6x4 inch listing requires measuring old baskets before ordering
Fits Select Waterway Skimmers, check your manual to ensure proper fit.Part# 519-4030B same as 519-4030 except this part is in mfg. sealed packaging.3 1/2" total height5 1/8" by 4 7/8" top of basket4 3/8" by 3 7/8" bottom of basket
Key specs
- Spa skimmer dimensions
- Total basket height: 3-1/2 inches
- Top rim: 5-1/8 by 4-7/8 inches
- Bottom profile: 4-3/8 by 3-7/8 inches
- Manufacturer fit confirmation
- Matches part numbers 519-4030 and 519-4030B for select Waterway skimmers. Verify equipment manuals before ordering to ensure correct seating.
Pros:
- Tailored for select Waterway spa and pool skimmer housings
- Sealed manufacturer packaging ensures pristine, non-degraded plastic on arrival
- Rectangular tapered base measuring 4-3/8 by 3-7/8 inches prevents housing jams
Cons:
- Compact 3-1/2 inch height fills rapidly during heavy foliage drops
- Non-standard dimensions require checking the equipment manual before purchase
Large strainer basket replacementFits hayward power-flo lx flooded suction pump models sp1575lx, sp1580, sp1580x15, sp1520un, ep1500lx, sp1680, sw1585x20, sw1585x25, sp1540tlAlso fits hayward easy-clear cartridge, perflex extended-cycle d.e., pro and vl series sand filters models c5501575xes, ec3015
Key specs
- Pump housing compatibility
- Hayward Power-Flo LX models SP1575LX, SP1580, SP1520UN
- Hayward Power-Flo II self-priming SP1705 through SP1780
- Flooded suction models SP1500, SP1510, SP1540C, EP1500
- Hayward filtration system match
- Fits Easy-Clear cartridge filters, Perflex extended-cycle DE filters, and Pro or VL series sand systems including model S144T1540S.
Pros:
- Genuine replacement strainer for Hayward Power-Flo LX and Power-Flo II pumps
- Compatible with select Hayward Easy-Clear, Perflex DE, and VL sand systems
- Lightweight 0.35-pound design pulls out quickly during pump strainer cleaning
- Guards pump impellers against pine needles and small stones pulled through suction lines
Cons:
- Fits Hayward pump strainers exclusively and does not work in pool skimmers
- Product listing omits exact rim dimensions so buyers must confirm pump model numbers
2 REPLACEMENT SKIMMER BASKETS: Fits many pool skimmers. Before purchasing, please verify our basket dimensions will allow it to fit properly into your pools skimmer.BASKET DIMENSIONS: 8" Diameter Across the Top, 5-1/2" Diameter Bottom and it's 5" Deep. Bottom is not weighted.DURABLE: Chlorine-resist
Key specs
- Skimmer diameter and depth
- 8-inch top diameter rim
- 5-1/2-inch bottom width
- 5-inch overall basket depth
- Unweighted base consideration
- The bottom is unweighted, meaning the basket may float out of place when the pump shuts off unless held down by captured debris or a skimmer weight.
Pros:
- Two-pack bundle provides an active basket and a dry backup for quick swaps
- Chlorine-resistant plastic mesh resists chemical embrittlement across long seasons
- Wide 8-inch top diameter and 5-inch depth fit common in-ground skimmer throats
- Backed by a 1-year replacement or refund policy from the manufacturer
Cons:
- Bottom is unweighted so the basket can float up when the pump cycles off
- Top diameter of 8 inches is too broad for narrow above-ground skimmer housings
2 REPLACEMENT SKIMMER BASKETS: Fits many pool skimmers. Before purchasing, please verify our basket dimensions will allow it to fit properly into your pools skimmer.BASKET DIMENSIONS: 8" Diameter Across the Top, 5-1/2" Diameter Bottom and it's 5" Deep. Bottom is not weighted.DURABLE: Chlorine-resist
Key specs
- Skimmer diameter and depth
- 8-inch top diameter rim
- 5-1/2-inch bottom width
- 5-inch overall basket depth
- Unweighted base consideration
- The bottom is unweighted, meaning the basket may float out of place when the pump shuts off unless held down by captured debris or a skimmer weight.
Pros:
- Two-pack bundle provides an active basket and a dry backup for quick swaps
- Chlorine-resistant plastic mesh resists chemical embrittlement across long seasons
- Wide 8-inch top diameter and 5-inch depth fit common in-ground skimmer throats
- Backed by a 1-year replacement or refund policy from the manufacturer
Cons:
- Bottom is unweighted so the basket can float up when the pump cycles off
- Top diameter of 8 inches is too broad for narrow above-ground skimmer housings
2 Above-Ground Swimming Pool Thru-Wall Skimmer Replacement Baskets with Handles. Standard small size for above-ground pool thru-wall skimmers.Basket measurements: Outer Top Width 6.25"; Inner Top Width 4.6"; Bottom Width 3.75"; Depth 3". Please measure your existing thru-wall skimmer basket dimensio
Key specs
- Thru-wall opening size
- Outer top width: 6.25 inches
- Inner top width: 4.6 inches
- Bottom width: 3.75 inches with 3-inch depth
- Package quantity and support
- 2-pack bundle backed by a 1-year replacement policy
Pros:
- Standard small thru-wall skimmer fit with a 6.25-inch outer top rim
- Built-in handle allows easy lifting without digging fingers into wet debris
- Chemical-resistant plastic mesh withstands pool water sanitizers
- Two-pack supplies an instant replacement if an existing basket cracks
Cons:
- Shallow 3-inch depth fills quickly when trees drop heavy seasonal debris
- Small thru-wall sizing cannot fit larger inground skimmer wells
Last update on 2026-10-08 / Affiliate links / Images, Product Titles, and Product Highlights from Amazon Product Advertising API
How can I tell whether I need a skimmer basket or a pump strainer basket?
Check the physical location where the basket sits along your pool circulation line. Skimmer baskets sit inside the pool deck opening or through-wall skimmer well along the pool edge to catch floating leaves before they enter underground plumbing. Pump strainer baskets, such as units built for Pentair WhisperFlo and IntelliFlo variable speed pumps or Hayward Power-Flo LX models like the SP1580, install inside the clear strainer pot directly in front of the pump motor. Using the wrong basket type leaves open gaps that let debris reach the impeller.
How do I measure my old basket so the replacement seats flat?
Measure the top outer width, the bottom diameter, and the total depth from the top rim down to the base. Strainer dimensions vary widely across equipment brands. For example, a Super Pro B-152 basket requires a 7-inch top width, a 6 1/2-inch bottom width, and a 5-inch basket height. Small above-ground thru-wall skimmer baskets can measure 6.25 inches across the outer top, 4.6 inches across the inner top, 3.75 inches at the bottom, and 3 inches deep. If the top rim is too wide, your skimmer deck cover will not seat; if it is too narrow, suction pulls leaves straight around the edges.
Why do unweighted skimmer baskets float, and how does that affect water flow?
Baskets float when the pool pump turns off and water circulation stops, especially when the basket bottom is not weighted. When a basket lifts off its ledge, trapped leaves and twigs drift underneath the base. The moment the pump cycles back on, suction pulls those loose leaves directly down the suction line toward your inground swimming pool filter and pump intake, creating stubborn line clogs. Confirming your basket matches the original rim width and depth keeps it firmly seated during daily pump cycles.
How do replacement cross-reference part numbers help verify basket compatibility?
Check the stamped model number on your existing basket or user manual against manufacturer cross-reference numbers. Many aftermarket replacement baskets match multiple original equipment numbers. A 91110040 pump basket replacement, for instance, cross-references Aladdin B-199, CMP 27180-199-000, Purex P01325, and Pentair part numbers 070387 and 070387Z. Similarly, CMP basket 27180-009-000 acts as a B-9 replacement for Hayward Skim Master SPX1070E and Pentair Bermuda 516112. Verifying these exact part numbers ensures the replacement will not collapse under heavy pump suction.
Can I use an above-ground skimmer basket in an inground pool skimmer?
No, because above-ground skimmer openings are much smaller than inground skimmer wells. If you run an above-ground swimming pool filter system, the skimmer basket typically measures roughly 6 inches by 4 inches, or features a compact 3-inch depth. Inground skimmer baskets, such as CMP 27180-009-000, measure around 8.2 inches wide and 5.1 inches high. Dropping a compact above-ground basket into an inground skimmer well creates wide bypass gaps that let heavy debris flood straight to your pump.
What equipment problems happen if debris slips past a cracked strainer basket?
Cracked or warped plastic allows pine needles, leaves, and stones to slip directly into the pump housing. Debris that gets past the basket lodges inside the pump impeller vanes, cutting water flow, creating suction air leaks, and starving the pump motor of cooling water. Over time, that restricted circulation overheats the motor and forces extra dirt into the filter tank. Checking your strainer basket for cracks and replacing brittle plastic before it breaks protects your pump from motor burnout.
