This formula is an ultra-strong cleaning concentrate. Instead of coming ready to spray straight from the bottle, it is a pure soap and degreaser designed to be mixed with water. A tiny splash can cut through sticky stove grease, muddy carpets, or dusty baseboards, turning one bottle into dozens of refill sprayers for the whole house.
How well it works always depends on getting the water mixture right for each job. Thick engine grease or baked-on oven spills need only a little water, while mirrors, polished tile, and painted walls require a very light blend. Pouring too much soap leaves behind a sticky, cloudy film that attracts more dust, and using it full strength can easily damage bare wood or peel fresh paint. Here is how to mix it safely, where to spray it, and which household surfaces to protect.
What makes Advanage different from regular spray cleaners?
Most cleaning sprays you buy at the grocery store come ready to use right out of the plastic bottle. Those products are mostly water, with a tiny amount of active soap mixed inside. You pay for the heavy plastic jug, the trigger sprayer, and the water from someone else's tap. Once the bottle runs dry, you toss it into the recycling bin and buy another one.
Advanage works on a completely different model. It is an ultra-strong concentrated liquid (a soap that must be mixed with water in a bucket or spray bottle). Instead of spraying it straight from the jug, you pour a small splash of concentrate into a spray bottle and fill the rest with tap water. One single container makes dozens of refill bottles, which saves cabinet space and cuts down on household plastic waste.
The formula functions as an emulsion cleaner and degreaser (a cleaner made to break down sticky cooking grease and oil). In basic terms, oil and water do not mix naturally. Grease clings stubbornly to kitchen backsplashes, stove hoods, and workshop tools because plain water rolls right off it. This cleaner acts like a bridge between the two. It latches onto thick grease, breaks it into tiny droplets, and suspends them in water so a cloth wipes them away easily.
Because the soap is so strong, using it requires attention to detail. If you spray the concentrate straight onto a light household mess, you end up with a sticky residue (a cloudy soap film left behind after drying). Getting great results comes down to matching the amount of water to the exact type of grime you want to remove.
Where can you safely use this cleaner around the house?
Because you control the dilution ratio (how much cleaner to mix into a spray bottle of water), you can use this one formula across many rooms. It replaces multiple specialty cleaners with a single mixing system.
Here are the surfaces and rooms where this cleaner works best:
- Kitchen appliances and backsplashes: It quickly dissolves greasy film on stovetops, range hood filters, microwave interiors, and stainless steel panels. It breaks down baked-on cooking oil that dish soap cannot lift.
- Bathrooms and fixtures: It removes soap film from fiberglass tubs, ceramic wall tiles, chrome sink handles, and porcelain basins. If your shower has deep black mildew rooted inside porous caulk lines, a targeted shower cleaner for mold works better for that specific fungus, but everyday soap scum wipes away quickly with a light Advanage mix.
- Hard floors: When mixed very light, it mops vinyl, linoleum, and sealed tile floors without leaving shoe prints or dulling the natural shine.
- Garages and outdoor gear: It lifts motor oil, dried grass clippings, and sticky dirt from hand tools, lawnmower decks, and patio furniture. For backyard grills, it cleans exterior shelves and grease trays, but never spray liquid cleaners inside pellet hoppers, firepots, or digital control boxes.
- Carpets and upholstery: A mild spray lifts muddy footprints, coffee spills, and food spots from living room rugs. But for animal accidents, avoid general household degreasers. Cat and dog urine contains uric acid crystals that require an enzyme-based formula like a specialized carpet cleaner for pet urine to digest the organic waste and stop repeat marking.
How do you mix it for different cleaning jobs?
Getting the water mix right is the most critical step when working with a concentrated cleaner. If your mix is too weak, oily grime simply smears across the surface. If your mix is too strong, you leave behind a soapy haze that attracts fresh dirt within a few days.
Grab an empty 32-ounce spray bottle, a set of kitchen measuring spoons, and a soft microfiber cloth. Follow these steps to mix the right batch for your chore:
- Add tap water to the bottle first: Always fill your spray bottle with warm tap water before adding the soap. If you pour the concentrate into an empty bottle and then run the faucet, the rushing water whips the soap into thick foam that spills out the neck.
- Mix a light solution for glass and dusting: For mirrors, window glass, picture frames, and dusty window blinds, add only half an ounce of concentrate to 32 ounces of water. That is roughly one tablespoon of soap. This mild ratio lifts dust without streaking reflective glass.
- Mix a medium solution for everyday counters: For kitchen countertops, bathroom sinks, plastic trash cans, and painted baseboards, add two ounces of concentrate to your 32-ounce bottle. That equals about four tablespoons of soap. This is your everyday workhorse spray for grease and daily spills.
- Mix a heavy batch for baked grease: For metal range hood vents, stained garage floors, oven doors, or grill drip pans, add four to six ounces of concentrate to your 32-ounce bottle. For large bucket jobs like mopping a patio, pour half a cup of cleaner per gallon of warm water into a five-gallon wash bucket.
- Give the cleaner proper soak time: Spray the soiled surface until it is completely wet. Let the wet spray sit on the surface for two to three minutes so the grease cutter can loosen the bond between the grime and the surface before you start wiping.
- Wipe and rinse with a clean cloth: Wipe the loosened grime away using a clean microfiber cloth. On shiny counters, stovetops, and glass, wipe the area a second time with a separate cloth dampened with plain warm water to pick up any remaining soap.
Which surfaces should you avoid or check first?
A strong degreasing formula can tackle tough messes, but it can also harm delicate household finishes if applied carelessly. The same grease-cutting power that strips engine oil can dry out natural materials or dissolve delicate protective sealers.
Unsealed natural wood requires caution. Hardwood dining tables, antique dressers, and bare wood floors absorb water-based soaps unevenly. The liquid can raise the wood grain, leave dark water stains, or soften delicate lacquer finishes. Stick to dedicated wood oils or dry microfiber dusting for bare or antique wood.
Polished natural stone also needs a careful hand. Marble, travertine, and limestone contain calcium carbonate, which can turn cloudy or dull when exposed to strong cleaning agents. Even gentle multipurpose cleaners can slowly strip the glossy factory polish from marble vanity tops over time. If you have sealed granite, stick to a very weak dilution ratio and rinse the counter with clean water right after wiping.
Vehicles and recreational equipment have their own sensitive points. Strong degreaser solutions can strip carnauba wax from car paint or leave hazy spots on tinted window film. For RV owners, rubber roof membranes (the flexible white rubber sheet on top of the RV, commonly EPDM or TPO) require mild care. Cleaners containing harsh solvents or citrus oils can cause rubber seams and sealants to swell or blister, which leads to roof leaks.
Before spraying rugs, carpets, or upholstered chairs, always do a color check on a hidden spot. Pick an unseen area behind a cushion or inside a closet corner. Mist a small amount of your mixed solution onto the fabric, wait five minutes, and blot the spot with a clean white paper towel. If any color rubs off on the paper towel, stop immediately and use plain water instead.
Safety should guide your routine whenever you handle concentrated chemicals. Wear rubber household gloves and safety glasses whenever you pour pure cleaner from the main jug into a spray bottle. Open a nearby window or turn on a vent fan to keep fresh air moving through the room. Never mix this cleaner with chlorine bleach or household ammonia, because combining cleaning chemicals creates hazardous gases that can injure your lungs.
What should you consider before choosing a bottle?
Choosing the right multipurpose concentrated cleaner comes down to how much cleaning you tackle each month and where you plan to store the supplies. Because these formulas last through dozens of refills, matching the container size and style to your home makes your chores much simpler.
Start by looking at the bottle size. A standard 32-fluid-ounce bottle of concentrate is ideal for typical household cleaning. It fits comfortably on a laundry shelf or under a kitchen sink, and it provides enough liquid to mix dozens of spray bottles over several months. On the other hand, if you clean a large workshop, maintain outdoor equipment, or mop large expanses of tile flooring each week, a full gallon jug makes more sense. A larger jug supplies plenty of liquid for bucket cleaning without frequent reordering.
Next, consider the fragrance for the rooms you clean most often. Cleaners scented with fresh citrus, lavender, or crisp green apple work well in kitchens and mudrooms because they help cut through lingering cooking odors. But if someone in your household has asthma, chemical sensitivities, or skin allergies, an unscented formula is the smarter option. An unscented cleaner delivers the exact same grease-cutting performance without introducing synthetic fragrances into your indoor air.
Finally, check what mixing tools you already own. A concentrated soap requires empty spray bottles, clear measuring spoons, and quality microfiber cloths to work properly. Having your bottles and cloths ready before your cleaner arrives ensures you mix the exact dilution ratio you need from the very first day.
Key specs
- Bottle Volume
- 128 fl oz (1 gal)
- Best Cleaning Scenarios
- Whole-house floor mopping routines
- Refilling standard spray bottles
- Bathroom tile and fixture cleaning
Pros:
- Generous 128 fl oz volume provides bulk supply for multiple room refills
- 20X concentrated formula enables custom dilution for light or heavy tasks
- Green apple scent leaves a fresh aroma in bathrooms and open living areas
- Made in the USA multisurface formula works across bathroom and floor surfaces
Cons:
- Heavy 128 fl oz jug requires a funnel or smaller dispenser for easy pouring
- Green apple fragrance may not suit fragrance-sensitive living areas
This unscented version suits enclosed rooms, nurseries, and homes where artificial perfumes or strong masking scents cause discomfort.
Key specs
- Fragrance Profile
- Unscented formulation
Pros:
- Unscented formula avoids adding artificial perfumes to indoor living areas
- 128 fl oz volume delivers high-volume supply for regular floor mopping
- 20X concentrate allows tailored mixing ratios for varying grime levels
- Made in the USA multisurface blend suited for floors and bathrooms
Cons:
- Unscented blend does not mask stubborn odors during heavy cleaning jobs
- Bulk 128 fl oz bottle requires a separate spray bottle to dilute and dispense
The 32 fl oz bottle takes up minimal shelf space under sinks and allows controlled pouring into mixing bottles without needing a funnel.
Key specs
- Bottle Volume
- 32 fl oz concentrate
Pros:
- Compact 32 fl oz bottle fits easily on standard cleaning utility shelves
- 20X concentrate yields substantial diluted cleaner from a manageable bottle
- Crisp green apple fragrance refreshes bathrooms and general living spaces
- Made in the USA multisurface formulation handles floors and bathrooms
Cons:
- 32 fl oz size yields less total mixed solution than the 128 fl oz gallon
- Spray bottle and dilution measurements must be supplied separately
The lavender aroma works well in bedrooms, linens, and guest bathrooms where a calm floral scent is desired after wiping down surfaces.
Key specs
- Fragrance Profile
- Lavender floral scent
Pros:
- Lavender scent provides a calming floral aroma for bedroom and bathroom cleaning
- 32 fl oz size is lightweight and easier to pour than heavy gallon jugs
- 20X concentrated liquid allows flexible dilution for various grime levels
- Multisurface formula made in the USA for bathroom, floor, and general use
Cons:
- Floral lavender scent may linger strongly in kitchen and food prep spaces
- Yields significantly less total mixed liquid than bulk 128 fl oz options
The citrus fragrance pairs naturally with grease-prone cooking zones, stovetops, and tile floors where a clean citrus aroma is preferred.
Key specs
- Formula Strength
- 20X concentrate multisurface cleaner
Pros:
- Citrus scent delivers a bright, refreshing aroma well suited for kitchen use
- 32 fl oz container is easy to store and handle during dilution mixing
- 20X concentrate formula adapts easily to light dusting or tough floor grime
- Made in the USA multisurface cleaner designed for floors and bathrooms
Cons:
- Requires separate spray bottles and water measuring for daily application
- Smaller 32 fl oz volume runs out faster in large homes than gallon jugs
Last update on 2026-10-26 / Affiliate links / Images, Product Titles, and Product Highlights from Amazon Product Advertising API
FAQs
Will Advanage leave a sticky film on hard floors?
It only leaves a sticky film if you use too much concentrate in your mop bucket. When excess soap dries on vinyl, tile, or linoleum, it leaves behind a cloudy residue that attracts new dirt. To keep your floors clean and shiny, use no more than one or two tablespoons of cleaner per gallon of warm water, and dump your mop bucket once the water turns cloudy.
Can you use Advanage cleaner in a carpet shampoo machine?
Yes, you can use it in a carpet machine, but you must keep the solution very weak. High soap concentrations create too much foam in the recovery tank and leave sticky soap deep in the carpet fibers. Mix only one ounce of concentrate per gallon of warm water in the machine's clean tank, and empty the recovery tank before it overflows.
Does the scent change how well the cleaner cuts grease?
No, the scent does not change the cleaning performance. Whether you choose green apple, citrus, lavender, or an unscented bottle, the active cleaning agents and grease cutters remain identical. Choose the fragrance that fits your personal preference and household sensitivities.
What should you do if the spray leaves cloudy streaks on glass?
Cloudy streaks on glass mean your mixture contains too much soap for a reflective surface. Pour out half of the liquid in your spray bottle and refill it with clean tap water to weaken the mix. Spray the glass again and buff it completely dry with a clean microfiber cloth to lift the leftover soap film.
